This 2 kW sauna heating tube is designed as a heating element for sauna and steam-generator equipment. It uses a 304 stainless steel tube, nickel-chromium alloy heating wire, and mineral oxide insulation. Diameter options include 8 mm and 10 mm, with lengths from 300 to 1200 mm. The heating tube is includes rapid heat-up, 360° heat radiation, corrosion resistance, infrared variants, and reinforced commercial-grade versions.
The core configuration combines 2 kW heating tube, 304 stainless steel construction, Nickel-chromium alloy heating wire, Mineral oxide insulation, rapid heat-up to 800°C in under 5 minutes, and lifespan above 30,000 hours. Together, these elements form the main product structure and operating setup for this model.
2 kW heating tube
304 stainless steel construction
Nickel-chromium alloy heating wire
Mineral oxide insulation
rapid heat-up to 800°C in under 5 minutes
lifespan above 30,000 hours
360° heat radiation pattern
8 mm / 10 mm diameter options
300-1200 mm length range
Infrared version with ceramic-coated surface
Low-EMF infrared design
Commercial-grade version with 1.5 mm wall thickness
Reinforced terminal connections
Up to 50 kW maximum capacity for commercial-grade variation
Wet/dry sauna corrosion resistance
Overheat protection built into design
Heat conversion above 98%
Standard fittings for replacement
The heating tube combines a 304 stainless steel outer tube with nickel-chromium alloy heating wire and mineral oxide insulation. This layered element structure is used for the 2 kW sauna heating tube and supports its role as a replaceable heating component in sauna and steam-generator equipment.
Two tube diameters are available: 8 mm and 10 mm. Length options extend from 300 mm to 1200 mm, providing a broad dimensional range for different heating-element layouts. A commercial-grade version is includes 1.5 mm wall thickness.
The tube is includes heat-up to 800°C in under five minutes, service life above 30,000 hours, and 360° heat radiation. An infrared version with a ceramic-coated surface and low-EMF design is also available. The product is suitable for both wet and dry sauna conditions.
Additional features include 360° heat radiation pattern, 8 mm / 10 mm diameter options, 300-1200 mm length range, Infrared version with ceramic-coated surface, Low-EMF infrared design, and Commercial-grade version with 1.5 mm wall thickness. They complement the main construction and operating features of the product.
Item | Specification |
|---|---|
Rated Product Reference | 2 kW |
Tube Material | 304 stainless steel |
Heating Wire | Nickel-chromium alloy |
Insulation | Mineral oxide |
Diameter Options | 8 mm / 10 mm |
Length Range | 300-1200 mm |
Heat-Up | 800°C in <5 minutes |
Service Life | 30,000+ hours |
Commercial Wall Thickness | 1.5 mm |
Commercial Max Capacity | 50 kW |
2kW Sauna Heating Tube for Steam Generator Elements is suitable for the following sauna, steam-room, wellness, or equipment applications:
Sauna heating equipment
Steam-generator heating elements
Wet and dry sauna equipment
In these settings, the product is used according to the capacity, power range, construction, and control configuration of the selected model.
The heating tube combines a stainless steel sheath, nickel-chromium heating wire, and mineral oxide insulation with multiple diameter and length options. Rapid heat-up, 360° heat radiation, long service-life data, infrared variants, and commercial-grade construction options broaden the range of heating-element configurations available for sauna and steam-generator equipment.
The combination of 2 kW heating tube, 304 stainless steel construction, Nickel-chromium alloy heating wire, and Mineral oxide insulation brings the main functions of 2kW Sauna Heating Tube for Steam Generator Elements into one integrated product configuration. Additional features extend the same core design without changing the primary product type or intended sauna, steam-room, heating, control, lighting, door, or wellness use.
The product includes 304 stainless steel construction.
Nickel-chromium alloy heating wire is .
8 mm and 10 mm diameter options are .
The product includes 300 mm to 1200 mm.
Yes. An infrared sauna heating tube with ceramic-coated surface and low-EMF design is described.
Yes. Corrosion resistance for wet/dry sauna use is .
