This indoor electric sauna heater is designed for sauna cabins that require rapid heating, even heat distribution, stainless steel construction, and adjustable temperature control. The heater series is available in 3 kW, 4.5 kW, 6 kW, and 7.5 kW power options, with 220V/380V voltage configurations. Its openwork design supports the sauna-stone arrangement and gives the unit a modern appearance suitable for traditional and contemporary sauna interiors.
The heater is built around a stainless steel structure and is compatible with sauna stones for adding steam. Temperature and timing can be adjusted through a digital control panel or a classic analog thermostat, while automated overheat protection supports stable operation. The product is intended to provide consistent heat throughout the sauna cabin while keeping the controls simple and accessible.
Fast-heating design for indoor sauna cabins.
Openwork structure suitable for sauna-stone use.
High-grade stainless steel construction.
Designed for even heat distribution throughout the sauna room.
Digital control panel or analog thermostat control options.
Adjustable temperature and timing.
Automated overheat protection.
Compatible with sauna stones for adding steam.
Available in 3 kW, 4.5 kW, 6 kW, and 7.5 kW models.
220V/380V voltage options across the series.
The heater is designed to reach the required sauna temperature rapidly and maintain a stable heating environment during use. Heat distribution is arranged to spread warmth throughout the sauna cabin rather than concentrate it in a single area. This makes the product suitable for indoor sauna rooms where a consistent thermal environment is important to the overall sauna experience.
The openwork design also supports the interaction between the heating structure and sauna stones. The stones act as part of the traditional sauna setup and can be used with water to create additional steam. This allows the heater to support both dry heat and adjustable humidity within the same indoor sauna environment.
High-grade stainless steel and durable components form the main construction of the sauna heater. The stainless steel structure is selected for operation under the high-temperature and humid conditions found in sauna cabins. The clean metal appearance also allows the heater to fit into different interior styles, from traditional wooden sauna rooms to more modern wellness spaces.
The openwork exterior gives the heater a distinctive structure while keeping the sauna stones visible as part of the overall design. This combination of stainless steel, exposed stone arrangement, and compact heater form creates a practical centerpiece for the heating area of an indoor sauna cabin.
The heater can be configured with a precise digital control panel or a classic analog thermostat. These control options allow the user to adjust temperature and timing according to the required sauna session. The digital and analog approaches provide two different control styles while retaining the same basic function of managing the heater.
Automated overheat protection is integrated into the heater design as a safety feature. Together with the temperature and timing controls, this helps create a controlled operating setup for regular sauna use. The controls are designed to be straightforward so that the heater can be adjusted without complicated operating steps.
Model | Power | Voltage |
|---|---|---|
FL-30B | 3 kW | 220V / 380V |
FL-45B | 4.5 kW | 220V / 380V |
FL-60B | 6 kW | 220V / 380V |
FL-75B | 7.5 kW | 220V / 380V |
The heater is compatible with sauna stones. When the stones are heated, water can be applied to them to add steam and adjust the humidity inside the sauna. This supports the traditional sauna practice of combining high-temperature air with controlled bursts of steam according to user preference.
The openwork design makes the stone area a visible and functional part of the heater. This gives the product a direct connection to the traditional sauna format while retaining an electric heating system and modern temperature-control options.
This heater is intended for indoor sauna cabins and sauna-room equipment projects. The available power range allows different models to be selected according to the heating requirements of the sauna installation. The stainless steel structure, sauna-stone compatibility, temperature controls, and overheat protection create a complete heater configuration for traditional and modern indoor sauna environments.
The product can be used where an electric sauna stove is preferred over other heating methods. Its series-based power selection also supports project planning when several sauna cabin sizes or specifications need to be matched with different heater capacities.
The main advantage of this sauna heater series is the combination of multiple power options, stainless steel construction, adjustable controls, sauna-stone compatibility, and overheat protection. The 3 kW to 7.5 kW range gives buyers several choices within the same product family, while the 220V/380V voltage configurations provide additional electrical options.
Fast heating and even heat distribution are central parts of the heater design. The ability to choose digital or analog control also allows the operating interface to be matched to the preferred sauna-room setup. For projects focused on traditional sauna use, the sauna-stone design adds the option of introducing steam and changing the humidity during a session.
The series includes 3 kW, 4.5 kW, 6 kW, and 7.5 kW models.
The listed models are available in 220V/380V configurations.
The heater is constructed from high-grade stainless steel and durable components.
Yes. It is compatible with sauna stones and can be used to create steam when water is applied to the heated stones.
Temperature and timing can be managed through a digital control panel or a classic analog thermostat.
Yes. Automated overheat protection is included as part of the heater design.
It is designed for indoor sauna cabins and sauna-room installations.
